This product uses silver ion to cause protein denaturation and interrupt nucleic acid synthesis to break down bacteria and stop the reproduction of virus, therefore resisting a wide range of bacteria and viruses in an efficient, stable and safe way. It carries with it multiple, weighty certifications at home and abroad and meets a stricter standard, Health+ for water-based paint. It has an excellent hiding power, is highly washable, alkali resistant and has a lasting brightness. It builds a comprehensively healthy wall and reduces the risk of getting sick through contact with pathogens.

Product use: For interior wall decoration and protection in villas, hotels, hospitals, schools, office buildings and homes, especially in public places demanding higher microorganism control.

Main ingredients: Water, pigment, filler, emulsion, auxiliaries, and silver ion coordination complex

Super Healthy, Super Caring

3TREES Health+ Water-Based Coating Standard

UL GREENGUARD Gold Certification

French Indoor Air Emissions A+ Certification

China Environmental Labelling Product Certification

Highly efficient, odorless

Free of 7 additives*

Outstanding Features, Superior Performance

99.99%* virus inactivation, caring for immunocompromised groups

99.99%* bacteria resistance, building a healthier life

One-Package Solution to Wall Problems

High scrub resistance

Excellent hiding power

Strong resistance to alkali

Can be made into light colors

Efficient resistance to mold

Endurable brightness

1. Free from 7 additives: No added VOC, formaldehyde, benzene substances (benzene, toluene, xylene, and ethylbenzene), excessive heavy metal pigments and fillers, APEO, ethylene glycol ether and ether ester, as well as PAEs. For details, refer to the China Environmental Labelling Product Certification Requirements.

2. Strong resistance to virus: 99.99% H3N2 flu virusinactivation. See test report for detail.

3. Strong resistance to bacteria: 99.99% containment of 17 kinds of bacteria and fungi common to home, including Escherichia coli and S. aureus. See test report for detail.

Application instructions: The surface must be clean, dry, neutral, flat, and free of floating ash, oil stains and foreign substances. Water-leaking positions must undergo waterproof treatment. Before coating, the surface should be polished and leveled to ensure that the surface humidity of the pre-coated substrate is <10% and the pH value is <10.

Application conditions: Wall temperature ≥5 ℃, humidity ≤85 %, well-ventilated.

Application method: Brushing, rolling, or spraying.

Dilution ratio: Dilute with an appropriate amount of clean water (until reaching the appropriate application viscosity).

Theoretical paint consumption: 12-14㎡/L/round (rolling) (paint film is calculated as 30μm, and actual consumption varies slightly with substrate roughness and porosity)..

Recoating time: Surface drying 30-60 minutes, recoating interval 2-3 hours (which may be duly extended under low-temperature and high-humidity conditions).

Maintenance time: 7 days / 25℃, which may be duly extended under low-temperature (not less than 5℃), high-humidity conditions to obtain a solid film effect. In the process of paint film maintenance and daily use, it is suggested that doors and windows should be closed for dehumidification in high humidity weather (such as Wet Spring and Plum Rain).

Substrate Treatment

1. New wall: Thoroughly remove surface dust, oil stains, loose plaster, etc., and repair any holes to ensure that the wall surface is clean, dry and smooth.

2. Re-painting wall: Thoroughly remove the original paint film and putty layer, clean surface dust, and level, polish, clean and thoroughly dry the surface, so as to avoid problems left over from the old wall (odor, mildew, etc.) affecting the application effect.

*Before coating, the substrate should be checked; coating can only start after the substrate passes acceptance inspection.

Coating System:

For best effect, please use this product together with 3TREES primer.

Substrate treatment (3TREES substrate treatment product series) - primer (3TREES Odorless Series Primer) - apply 1 round - topcoat (360 Multi-Effect Anti-Bacterial & Anti-Viral Allround Wall Paint) – apply 2 rounds

Tool Cleaning:

After or between applications, please clean the tools with clean water in time in order to prolong tool life. The packaging bucket can be recycled after cleaning, and packaging waste may be recycled for reuse.

1. This product should be sealed and stored at 0-40℃ in a cool and dry place and away from exposure to the sun.

2. Refer to the product label for production date, batch number and expiration date.