This product is an intelligent paint using innovative technology to purify indoor air. It reacts to visible light, catches active organic pollutants and degrades them into harmless substance. It effectively decomposes pollutants (chiefly formaldehyde) and smelly molecules (chiefly trimethylamine and methyl mercaptan). It also contains microorganisms on the paint film and reduces infection through touching. It is odorless, with no additives and carries with it multiple, weighty certifications at home and abroad. It meets a stricter standard, Health+ for water-based paint, and therefore offers an ideal choice for a healthy life.

Fresh Breath Air Purification Paint, an “air purifier” on the wall

It is widely used in the interior wall decoration and protection in villas, hotels, hospitals, schools, office buildings and homes.

Main ingredients: Water, pigment, filler, emulsion, auxiliaries, and high visible-light photocatalyst

Super Healthy, Super Caring

3TREES Health+ Water-Based Coating Standard

China Green Product Certification

UL GREENGUARD Gold Certification

French Indoor Air Emissions A+ Certification

China Environmental Labelling Product Certification

Highly efficient, odorless

Free of 7 additives

Excellent Function, Purer Quality

• Visible-Light Intelligent Purification Technology

It catches active organic pollutants in indoor air and degrades them into harmless substance, thus purifying the air in an efficient, lasting way. There is no saturation, no second pollution.

• High Resistance to Bacteria, Virus

It resists 19 kinds of bacteria and molds common to home, as well as H3N2 flu and polio, to create a healthier environment

Full Function, Better Effect

Excellent hiding power

High scrub resistance

Strong resistance to alkali

Can be made into light colors

Efficient resistance to mold

Solid paint film

Endurable brightness

Easier application

1. Resistance to bacteria: including 19 bacteria common to home, such as Escherichia coli. 

2. Resistance to virus: 99.99% antiviral activity for H3N2 flu, 98% antiviral activity for polio. 

3. Coloring: inorganic pigments shall be used considering visible-light purification principles.

Application Instructions

The surface must be clean, dry, neutral, flat, and free of floating ash, oil stains and foreign substances. Water-leaking positions must undergo waterproof treatment. Before coating, the surface should be polished and leveled to ensure that the surface humidity of the pre-coated substrate is <10% and the pH value is <10. Paint surface effect will depend on substrate flatness.

Application Conditions

Wall temperature ≥5 ℃, humidity ≤85 %, well-ventilated.

Application Method

Brushing, rolling, or spraying.

Dilution Ratio

Dilute with clean water (to a suitable proportion).

Theoretical Paint Consumption

12-14m2/L/round (paint film is calculated as 30μm, and actual consumption varies slightly with substrate roughness and porosity).

Recoating Time

Surface drying 30-60 minutes, hard drying 2 hours, recoating interval 2-3 hours (which may be duly extended under low-temperature and high-humidity conditions).

Maintenance Time

7 days / 25℃, which may be duly extended under low-temperature, high-humidity conditions to obtain a solid film effect. In the process of paint film maintenance and daily use, it is suggested that doors and windows should be closed for dehumidification in high humidity weather (such as Wet Spring and Plum Rain).

Substrate Treatment

1. New wall: Thoroughly remove surface dust, oil stains, loose plaster, etc., and repair any holes to ensure that the wall surface is clean, dry and smooth.

2. Re-painting wall: Thoroughly remove the original paint film and putty layer, clean surface dust, and level, polish, clean and thoroughly dry the surface, so as to avoid problems left over from the old wall (odor, mildew, etc.) affecting the application effect.

*Before coating, the substrate should be checked; coating can only start after the substrate passes acceptance inspection.

Coating System

For best effect, please use this product together with 3TREES primer.

Substrate treatment (3TREES substrate treatment product series) - primer (Fresh Breath Odorless All-in-1 Primer) - apply 1 round - topcoat (Fresh Breath Air Purification Paint) – apply 2 rounds

Tool Cleaning

After or between applications, please clean the tools with clean water in time in order to prolong tool life. The packaging bucket can be recycled after cleaning, and packaging waste may be recycled for reuse.

This product should be sealed and stored at 0-40℃ in a cool and dry place and away from exposure to the sun.

Refer to the product label for production date, batch number and expiration date.